2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Inner-lock system full lock mechanism Mis-insertion prevention Fig.1 Features 1. Full Lock Function Added The inner lock system adopts a full lock mechanism. This mechanism prevents disengagement to occur due to an unexpected external shock. (Fig.1) Double lock engaged 2. Increase in Crimping Contact Fixation Force and Semi-insertion Prevention The double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (Fig.2) 3. Mold Lance Adopted Since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. Mis-insertion Prevention Equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (Fig.1) 5. Means to Prevent Solder Crack The glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. Correspond to Potting Corresponding to potting, the pin header is provided for product variations. Corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. Production Facility Cost Reduction The female crimping contact uses the DF1B series crimping contact, which has been conventionally marketed. Investment for new facilities isn't needed. However, if the retainer is installed in the cable with 22 AWG or more wire, use the DF1E crimping contact. The female crimping contact for in-line is used together with the DF1B applicator. Therefore, no investment is needed for new facilities. B146 Double lock engaged Fig.2 8. Various Applications With the same series, various applications can be used for the board solder dip type and inline. 9. Listed by UL, C-UL DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection Products Specifications Current rating Note 1. AWG#20 to 24 : 3A 26 : 2A 28 : 1A 30 : 0.5A Voltage rating 250VAC Rating Operating Temperature Range : -35 to +85c Note 2. Operating Moisture Range : -40 to 80% Storage Temperature Range : -10 to +60c Note 3. Storage Moisture Range : -40 to 70% Note 3. UL/C-UL File No. and Recognition No. UL : E52653 C-UL : E52653 UL, C-UL Rating Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 20 to 22 AWG : 3A Current rating 24 to 28 AWG : 1A Rating 30 AWG : 0.5A Voltage rating 29.9V AC Item Specification 1. Contact Resistance 30m max. Condition Measured at 20mV max. and 1mA 2. Insulation Resistance 1000M min. 500V DC 3. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 4. Single Insertor/Extraction Forth MIN 0.29N, MAX 4.41N Measured at the square steel pin with 0.6350.002 5. Durability (Mating/un-mating) 30m max Tin plated : 30 cycles, Gold plated : 50 cycles 6. Vibration No electrical discontinuity of 1s or more Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. Shock No electrical discontinuity of 1s or more Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. Humidity (Steady state) 30m max 96 hours at temperature of 402c and humidity of 90% to 95% 9. Temperature Cycle 30m max. (-55c : 30 minutes-> 5 to 35c : 5 minutes-> 85c : 30 minutes-> 5 to 35c : 5 minutes) 5 cicles 10. Resistance to Soldering heat No deformation of components affecting performance. Flow : 260c for 10 seconds Manual soldering : 300c for 3 seconds Note 1 : Current rating of header is 3A. Note 2 : Includes temperature rise caused by current flow. Note 3 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Materials / Finish Product Part Material Finish Remarks Socket Insulator Polyamide White UL94V-0 Insulator Polyamide Beige UL94V-0 Contact Brass Tin plated or Gold plated ------- In-line Plug Insulator Polyamide White UL94V-0 retainer Insulator Polyamide Black UL94V-0 Crimping contact Contact Phosphor copper Tin plated or Gold plated ------- Header B147 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection Product Number Structure Pin Header DF1E C - * P - 2.5 DSA q w e r t y q Series Name : DF1E w Hold Types e Number of Contacts : 2 to 15 contacts (Note 1) Blank : Right Angle Pin Header C : Straight Pin Header G : Straight Pin Header for r Connector Type P : Pin Header t Contact Pitch : 2.5mm y Form type Potting Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DSA : Straight Type DS : Right Angle Type Note 1 : Straight pin header for potting has 2 to 11 contacts. Socket q Series Name : DF1E DF1E - * S - 2.5 C q w e r w Number of Contacts : 2 to 15 contacts t e Connector type S : Socket r Contact Pitch : 2.5mm t Form Type C : Crimping socket In-line Plug DF1E A - * EP - 2.5 C q w e r t y q Series Name : DF1E e Number of Contacts : 2 to 10 contacts w In-line Plug type r EP : In-line plug Blank : With Panel mount Lock t Contact Pitch : 2.5mm A : Without Panel mount Lock y Form Type C : Crimping socket Crimping Contact q w w Applicable Cable Size q Series Name : DF1E - ** SCF e Socket side : DF1B (Note 1) 2022 : 20 to 22 AWG DF1E (Note 1) 2428 : 24 to 28 AWG Plug side : DF1E 30 : 30 AWG e Packaging Type SCF : Female contact/reel/Tin plated SCFA : Female contact/reel/Gold plated SC : Female contact/pack/Tin plated SCA : Female contact/pack/Gold plated PCF : Male contact/reel/Tin plated PCFA : Male contact/reel/Gold plated PC : Male contact/pack/Tin plated PCA : Male contact/pack/Gold plated Note 1 : When the retainer is used, use DF1E-2022SC(F)(A), DF1B-2428SC(F)(A), and DF1B-30SC(F)(A) contacts. Note 1 : When no retainer is used, all DF1B-**SC(F)(A) and DF1E-2022SC(F)(A) contacts can be used. Retainer DF1E - * RS/P - 2.5 q w e r q Series Name : DF1E w Number of Contacts : 2 to 10 contacts e Connector Type RS/P : Retainer Commonly used for socket and in-line plug r Contacts Pitch : 2.5mm B148 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection BApplication Pattern Pin Header Straight Type Straight Potting Type Right Angle Type Socket In-line Plug Retainer Photo : Contact Inserted Photo: Contact Inserted Photo: Contact Inserted BMated Dimensions Standard Header 8.5 DF1E _ * S _ 2.5 C DF1E _ * RS / P _ 2.5 18.8 DF1E# _ * P _ 2.5 DSA 17.3 DF1E _ * P _ 2.5 DS (**) 8.5 14.3 15.8 DF1E _ * RS / P _ 2.5 DF1E _ * S _ 2.5 C 3.7 3 10.8 14.3 Header for Potting 8 DF1E _ * S _ 2.5 C DF1E _ * RS / P _ 2.5 11.7 8 MAX 19.8 21.3 Potting Resin 3.2 DF1E# _ * P _ 2.5 DSA Panel Mounting Lock In-line Plug In-line Plug 25.3 25.3 17 DF1E _ * RS / P _ 2.5 9 9 Panel DF1E _ * RS / P _ 2.5 8.1 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. In-line Plug In-line Plug (Panel Mount Lock Type) DF1E _ * RS / P _ 2.5 DF1E _ * S _ 2.5 C DF1E _ * RS / P _ 2.5 DF1E _ * S _ 2.5 C DF1EA _ * EP _ 2.5 C DF1E _ * EP _ 2.5 C 15.5 22.3 22.3 B149 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection Right Angle Pin Header Contact No. mark 10 Mold Cavity No. mark 5.9 A 2.9 0.5 8 6.95 5.4 M 0.64 P=2.5 A Contact No.1 indicated 8.3 4.5 10.8 Note 2 3.2 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 13.8 B Part No. HRS No. No. of Contacts A B DF1E-02P-2.5DS(**) 541-0985-0 ** 2 02.5 07.5 DF1E-03P-2.5DS(**) 541-0986-3 ** 3 05.0 10.0 DF1E-04P-2.5DS(**) 541-0987-6 ** 4 07.5 12.5 DF1E-05P-2.5DS(**) 541-0988-9 ** 5 10.0 15.0 DF1E-06P-2.5DS(**) 541-0989-1 ** 6 12.5 17.5 DF1E-07P-2.5DS(**) 541-0990-0 ** 7 15.0 20.0 DF1E-08P-2.5DS(**) 541-0991-3 ** 8 17.5 22.5 DF1E-09P-2.5DS(**) 541-0992-6 ** 9 20.0 25.0 DF1E-10P-2.5DS(**) 541-0993-9 ** 10 22.5 27.5 DF1E-11P-2.5DS(**) 541-0994-1 ** 11 25.0 30.0 DF1E-12P-2.5DS(**) 541-0995-4 ** 12 27.5 32.5 DF1E-13P-2.5DS(**) 541-0996-7 ** 13 30.0 35.0 DF1E-14P-2.5DS(**) 541-0997-0 ** 14 32.5 37.5 DF1E-15P-2.5DS(**) 541-0998-2 ** 15 35.0 40.0 RoHS [Specific No.] -* *, (* *) (36) : Gold plated (35) : Tin plated Yes Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2 : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. Note 3 : Styles of 2 to 4 contact connectors partially differ from those in above figures. PCB mounting pattern (Board Thickness t = 1.6 0.1) A0.1 P = 2.50.05 * - O1 .1 + 0 B150 0. 1 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection Straight Pin Header Contact No. mark 10 Mold Cavity No. mark 5.9 A 0.5 8 6.95 5.4 P=2.5 A Contact No.1 indicated 3.6 M 0.64 Note 2 3.2 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 10.8 8.3 4.5 B Part No. HRS No. No. of Contacts A B DF1EC-02P-2.5DSA(**) 541-0867-4 ** 2 02.5 07.5 DF1EC-03P-2.5DSA(**) 541-0868-7 ** 3 05.0 10.0 DF1EC-04P-2.5DSA(**) 541-0869-0 ** 4 07.5 12.5 DF1EC-05P-2.5DSA(**) 541-0870-9 ** 5 10.0 15.0 DF1EC-06P-2.5DSA(**) 541-0871-1 ** 6 12.5 17.5 DF1EC-07P-2.5DSA(**) 541-0872-4 ** 7 15.0 20.0 DF1EC-08P-2.5DSA(**) 541-0873-7 ** 8 17.5 22.5 DF1EC-09P-2.5DSA(**) 541-0874-0 ** 9 20.0 25.0 DF1EC-10P-2.5DSA(**) 541-0875-2 ** 10 22.5 27.5 DF1EC-11P-2.5DSA(**) 541-0876-5 ** 11 25.0 30.0 DF1EC-12P-2.5DSA(**) 541-0877-8 ** 12 27.5 32.5 DF1EC-13P-2.5DSA(**) 541-0878-0 ** 13 30.0 35.0 DF1EC-14P-2.5DSA(**) 541-0879-3 ** 14 32.5 37.5 DF1EC-15P-2.5DSA(**) 541-0880-2 ** 15 35.0 40.0 RoHS [Specific No.] -* *, (* *) (36) : Gold plated (35) : Tin plated Yes Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2 : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. Note 3 : Styles of 2 to 4 contacts partially differ from those in above figures. PCB mounting pattern (Board Thickness t = 1.6 0.1) A0.1 P = 2.50.05 * - O1 .1 + 0 0. 1 B151 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection 5.4 Contact No. mark Mold Cavity No. mark A 10 5.9 C 6.95 Straight Pin Header for Potting P=2.5 A B 8.3 16.3 3 3.2 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. M 0.64 Note 2 Note 2 Part No. HRS No. No. of Contacts A B C DF1EG-02P-2.5DSA(**) 541-0923-3 ** 2 02.5 07.5 8.0 DF1EG-03P-2.5DSA(**) 541-0924-6 ** 3 05.0 10.0 8.0 DF1EG-04P-2.5DSA(**) 541-0925-9 ** 4 07.5 12.5 8.0 DF1EG-05P-2.5DSA(**) 541-0926-1 ** 5 10.0 15.0 7.8 DF1EG-06P-2.5DSA(**) 541-0927-4 ** 6 12.5 17.5 7.8 DF1EG-07P-2.5DSA(**) 541-0928-7 ** 7 15.0 20.0 7.8 DF1EG-08P-2.5DSA(**) 541-0929-0 ** 8 17.5 22.5 7.8 DF1EG-09P-2.5DSA(**) 541-0930-9 ** 9 20.0 25.0 7.8 DF1EG-10P-2.5DSA(**) 541-0931-1 ** 10 22.5 27.5 7.8 DF1EG-11P-2.5DSA(**) 541-0932-4 ** 11 25.0 30.0 7.8 RoHS [Specific No.] -* *, (* *) (35) : Tin plated Yes Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity for delivery will be changed according to spec number. Note 2 : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. Note 3 : Styles of 2 to 4 contact may partially differ from the above figures. PCB mounting pattern (Board Thickness t = 1.6 0.1) A0.1 P = 2.50.05 * - O1 .1 + 0 B152 4.5 Contact No.1 indicated 0. 1 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection In-line Plug (Panel Mount Lock Type) 2.8 A 0.9 10 A 6.9 8.1 2.8 B P=2.5 Mold Cavity No. mark Contact No. mark Contact No.1 indicated 12 10 Contact No. mark 9 7 5 3 1 Contact No. mark Note 2 Photo: Contact Inserted. Note 3 Part No. HRS No. No. of Contacts A B C DF1E-02EP-2.5C 541-0943 -0 DF1E-03EP-2.5C 541-0944 -3 DF1E-04EP-2.5C DF1E-05EP-2.5C D E 2 8.0 2.5 3 10.5 5.0 15.0 8.4 11.9 17.5 10.9 14.4 541-0945 -6 4 13.0 541-0946 -9 5 15.5 7.5 20.0 13.4 16.9 10.0 22.5 15.9 19.4 DF1E-06EP-2.5C 541-0947 -1 6 18.0 DF1E-07EP-2.5C 541-0948 -4 7 20.5 12.5 25.0 18.4 21.9 15.0 27.5 20.9 24.4 DF1E-08EP-2.5C 541-0949 -7 8 DF1E-09EP-2.5C 541-0950 -6 9 23.0 17.5 30.0 23.4 26.9 25.5 20.0 32.5 25.9 29.4 DF1E-10EP-2.5C 541-0951 -9 10 28.0 22.5 35.0 28.4 31.9 RoHS Yes Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2 : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3 : In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. Note 4 : Use the no radius side at the panel edge in the looking area. Note 5 : Panel fixation is loosened. (May be enlarged according to the panel board thickness.) Note 6 : Styles of 2 to 4 contact partially differ from those in the above figures. * Refer to page B156 for the retainer. Panel Cutout (E+X) 1.5 1.3 to 1.6 1.0 0.9 to 1.2 0.5 0.7 to 0.8 0.0 +0.2 0 Panel +0.1 8.4 0 1.7 to 2.0 5.8 Note 4 4.20.05 X +0.1 0 Panel Thickness 1.1 +0.1 0 D +0.1 0 +0.1 0 3.5 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 18.8 C B153 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection In-line Plug A B 0.9 P=2.5 Mold Cavity No. mark Contact No. mark A 6.9 8.1 10 Photo: Contact Inserted 18.8 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Contact No.1 indicated 10 9 7 5 1 3 Contact No. mark Note 2 Contact No. mark Note 3 Part No. HRS No. No. of Contacts A B DF1EA-02EP-2.5C 541-0957-5 2 08.0 02.5 DF1EA-03EP-2.5C 541-0958-8 3 10.5 05.0 DF1EA-04EP-2.5C 541-0959-0 4 13.0 07.5 DF1EA-05EP-2.5C 541-0960-0 5 15.5 10.0 DF1EA-06EP-2.5C 541-0961-2 6 18.0 12.5 DF1EA-07EP-2.5C 541-0962-5 7 20.5 15.0 DF1EA-08EP-2.5C 541-0963-8 8 23.0 17.5 DF1EA-09EP-2.5C 541-0964-0 9 25.5 20.0 DF1EA-10EP-2.5C 541-0965-3 10 28.0 22.5 RoHS Yes Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2 : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. Note 4 : Styles of 2 to 4 contacts partially differ from the above figures. * Refer to page B156 for retainer. B154 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection 4.55 Socket P=2.5 A B C 8.5 11.8 Photo: Contact Inserted 10 1 Contact No.1 indicated Contact No. mark 7.55 A Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note 2 Mold Cavity No. mark Note 3 Note 3 Note 4 Note 4 Part No. HRS No. No. of Contacts A B C DF1E-02S-2.5C 541-0811-0 2 02.5 08.0 05.4 DF1E-03S-2.5C 541-0812-2 3 05.0 10.5 07.9 DF1E-04S-2.5C 541-0813-5 4 07.5 13.0 10.4 DF1E-05S-2.5C 541-0814-8 5 10.0 15.5 12.9 DF1E-06S-2.5C 541-0815-0 6 12.5 18.0 15.4 DF1E-07S-2.5C 541-0816-3 7 15.0 20.5 17.9 DF1E-08S-2.5C 541-0817-6 8 17.5 23.0 20.4 DF1E-09S-2.5C 541-0818-9 9 20.0 25.5 22.9 DF1E-10S-2.5C 541-0819-1 10 22.5 28.0 25.4 DF1E-11S-2.5C 541-0820-0 11 25.0 30.5 27.9 DF1E-12S-2.5C 541-0821-3 12 27.5 33.0 30.4 DF1E-13S-2.5C 541-0822-6 13 30.0 35.5 32.9 DF1E-14S-2.5C 541-0823-9 14 32.5 38.0 35.4 DF1E-15S-2.5C 541-0824-1 15 35.0 40.5 37.9 RoHS Yes Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2 : The 2 contact connector is equipped with the convex portion to prevent false-insertion. Note 3 : The 2 consult Has no wall on the locking side Note 4 : The 2 to 5 contacts contain the retainer fixed convex portions at both ends. * Refer to page B156 for the retainer. B155 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection Retainer A 1.9 B 1.7 0.7 1.5 3.3 5.9 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. P = 2.5 Note2 Note2 Contact No. mark A1 0 Mold Cavity No. mark Part No. HRS No. No. of Contacts A B DF1E-02RS/P-2.5 541-0971-6 2 08.0 02.5 DF1E-03RS/P-2.5 541-0972-9 3 10.5 05.0 DF1E-04RS/P-2.5 541-0973-1 4 13.0 07.5 DF1E-05RS/P-2.5 541-0974-4 5 15.5 10.0 DF1E-06RS/P-2.5 541-0975-7 6 18.0 12.5 DF1E-07RS/P-2.5 541-0976-0 7 20.5 15.0 DF1E-08RS/P-2.5 541-0977-2 8 23.0 17.5 DF1E-09RS/P-2.5 541-0978-5 9 25.5 20.0 DF1E-10RS/P-2.5 541-0979-8 10 28.0 22.5 RoHS Yes Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2 : The 2 to 4 contacts contain socket and plug fixed holes at both ends. * This retainer can be used together with the socket and In-line plug. B156 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection Plug Crimping Contact 0.68 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Part No. HRS No. 2 2.4 1.2 18.9 13.9 0.64 Applicable Cable UL Style 1007 1061 Jacket Diameter DF1E-2022PCF 541-0937-8 DF1E-2022PC 541-0938-0 1007 O1.8mm O1.6mm DF1E-2428PCF 541-0939-3 1007 1061 O0.9 to 1.5mm DF1E-2428PC 541-0940-2 1007 O1.5mm O1.3mm O1.2mm DF1E-2022PCFA 541-1003-0 1007 1061 O1.2 to 1.9mm DF1E-2022PCA 541-1004-3 1007 O1.8mm O1.6mm DF1E-2428PCFA 541-1005-6 1007 1061 O0.9 to 1.5mm DF1E-2428PCA 541-1006-9 1007 O1.5mm O1.3mm O1.2mm O1.2 to 1.9mm Wire Size Stranded Wire Conductor 20 AWG 22 AWG 20 AWG 22 AWG 24 AWG 26 AWG 28 AWG 24 AWG 26 AWG 28 AWG 20 AWG 22 AWG 20 AWG 22 AWG 24 AWG 26 AWG 28 AWG 24 AWG 26 AWG 28 AWG 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 Packaging Finish RoHS 10,000 / reel 100 / pack 10,000 / reel Tin plated 100 / pack Yes 10,000 / reel 100 / pack 10,000 / reel Gold plated 100 / pack Note 1 : Crimping Contact Extraction Tool DF-C-PO(B) Note 2 : Applicable wire with tin plated solid soft conductor. Note 3 : When using other than the recommended wire, contact your nearest Hirose representative. Note 4 : Strip length : 3.0 to 3.7mm B157 DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection Socket Crimping Contact DF1E-2022SCF (A) 1.75 1.4 0.83 Applicable cable indicated 1.75 0.975 Applicable cable indicated 1.4 1.6 1 0.55 14 9.5 6.1 2.5 1.95 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.4 2.4 1.6 12.9 9.4 3.35 2.55 1.95 DF1B - * * * * SCF (A) Part No. HRS No. Applicable Cable UL Style 1007 1061 Jacket Diameter Wire Size Packaging Finish RoHS Stranded Wire Conductor 21/0.18 10,000 / reel 17/0.16 21/0.18 100 / pack 17/0.16 21/0.18 10,000 / reel 17/0.16 21/0.18 100 / pack 17/0.16 11/0.16 Tin plated 10,000 / reel 7/0.16 7/0.127 11/0.16 100 / pack 7/0.16 7/0.127 DF1E-2022SCF 541-0999-5 DF1E-2022SC 541-1000-2 1007 O1.8mm O1.6mm DF1B-2022SCF 541-0223-1 1007 1061 O1.2 to 1.9mm DF1B-2022SC 541-0224-4 1007 O1.8mm O1.6mm DF1B-2428SCF 541-0678-1 1007 1061 O0.9 to 1.5mm DF1B-2428SC 541-0679-4 1007 O1.5mm O1.3mm O1.2mm 20 AWG 22 AWG 20 AWG 22 AWG 20 AWG 22 AWG 20 AWG 22 AWG 24 AWG 26 AWG 28 AWG 24 AWG 26 AWG 28 AWG DF1B-30SCF 541-0682-9 1007 1061 O0.6 to 1.2mm 30 AWG 7/0.1 10,000 / reel DF1B-30SC 541-0683-1 1007 O1.1mm 30 AWG 7/0.1 100 / pack DF1E-2022SCFA 541-1001-5 1007 1061 O1.2 to 1.9mm DF1E-2022SCA 541-1002-8 1007 O1.8mm O1.6mm DF1B-2022SCFA 541-0662-1 1007 1061 O1.2 to 1.9mm DF1B-2022SCA 541-0663-4 1007 O1.8mm O1.6mm DF1B-2428SCFA 541-0680-3 1007 1061 O0.9 to 1.5mm DF1B-2428SCA 541-0681-6 1007 O1.5mm O1.3mm O1.2mm 20 AWG 22 AWG 20 AWG 22 AWG 20 AWG 22 AWG 20 AWG 22 AWG 24 AWG 26 AWG 28 AWG 24 AWG 26 AWG 28 AWG 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 DF1B-30SCFA 541-0684-4 1007 1061 O0.6 to 1.2mm 30 AWG 7/0.1 10,000 / reel DF1B-30SCA 541-0685-7 1007 O1.1mm 30 AWG 7/0.1 100 / pack O1.2 to 1.9mm Note 1 : Crimping Contact Extraction Tool DF-C-PO(B) Note 2 : Applicable wire with tin plated solid soft conductor. Note 3 : When using other than the recommended wire, contact your nearest Hirose representative. Note 4 : Strip length : 2.0 to 2.5mm B158 Yes 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack Gold plated DF1E Series2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection BCrimping Tools Item Part No. HRS No. AP105-DF1E-2022S 901-4561-0 AP105-DF1B-2022S 901-4510-9 AP105-DF1B-2428S 901-4518-0 AP105-DF1B-30S 901-4517-8 AP105-DF1B-2022P 901-4509-0 AP105-DF1B-2428P 901-4521-5 CM-105C 901-0001-0 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Applicator Powered by TCPDF (www.tcpdf.org) Main Press Unit HT102/DF1E-2022S 550-0277-1 DF1B-TA2022SHC 550-0182-7 DF1B-TA2428SHC 550-0209-1 DF1B-TA30SHC 550-0211-3 Manual Crimping Tool Contact Extraction Tool Applicable Contact DF1E-2022SCF DF1E-2022SCFA DF1B-2022SCF DF1B-2022SCFA DF1B-2428SCF DF1B-2428SCFA DF1B-30SCF DF1B-30SCFA DF1E-2022PCF DF1E-2022PCFA DF1E-2428PCF DF1E-2428PCFA DF1E-2022SC DF1E-2022SCA DF1B-2022SC DF1B-2022SCA DF1B-2428SC DF1B-2428SCA DF1B-30SC DF1B-30SCA HT102/DF1BE-2022P 550-0278-4 DF1E-2022PC HT102/DF1BE-2428P 550-0279-7 DF1E-2428PC DF-C-POB 550-0179-2 DF1E-2022SCF A DF1B-SCF A DF1E-PCF A K " to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized. Note 1 : Add "K Note 2 : If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. Note 3 : For the crimping process, refer to "crimping quality standards" and "crimping condition". BPrecautions 1. Recommended Soldering Condition Flow : 260c for 10 seconds Manual soldering : 300c for 3 seconds 2. Cleaning Condition Refer to Wire-to-Board Connector Use Hand book. However, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. Connection Condition Refer to Wire-to-Board Connector Use Hand book. 4. Cautions To remove the connector, if the connector is forcedly removed, it will cause connector damage. If the connector is hardly removed, slightly push the connector once, and then remove it using the lock. In some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. In this case, it is recommended to use the retainer. Incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. Insert the contact securely and then mount the retainer. If the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. Precautions Refer to Wire-to-Board Connector Use Hand book. B159